| Main Dimensions |
Dimensions(L x W x H)mm |
8490X2350X2410 |
| Wheel base (mm) |
4475 |
| Overhang (front/rear) (mm) |
1110/2905 |
| Wheel track (front/rear) (mm) |
1680/1650 |
| Approach/Departure angle(°) |
43364 |
| Weight in KGS |
GVW. |
9410 |
| Curb Weight |
5670 |
| Max. driving speed(km/h) |
95 |
| Allowable passengers in cab |
2 |
| Engine |
Model |
4KH1-TC |
| Type |
4-stroke direct injection , 4cylinder in-line with water cooling, turbo-charging and inter-cooling |
| Horse Power(HP) |
190 |
| Emission standard |
Euro 3 4 5 6 |
| Platform organ |
Length(mm)×Width(mm) |
6200×2400 |
| Operating stroke(mm) |
2680 |
| Min. angle of slope(°) |
8 |
| Rated loading weight(kg) |
5000 |
| Rated winch traction weight(kg) |
5000 |
| Length of steel wire rope(m) |
21 |
| Ground clearance of cage floor(mm) |
470 |
| Hoisting organ |
Max. length of extended boom(mm) |
1680 |
| Rated lifting weight(kg) |
3635 |
| Max. extended lifting weight(kg) |
2500 |
| Rated traction weight(kg) |
10000 |
| Elevation of boom (upper/ lower)(°) |
9~-10 |
| Max. length of extended boom(mm) |
1680 |
| Rated lifting weight(kg) |
3635 |
| Gearbox |
5 forwards & 1 reverse |
| Fuel tank (L) |
120L |
|
| Tire |
8.25-16-14PR, 6 pieces+1 spare tire |
| Operation control system |
Electrically hydraulic control |
A wrecker providing production plans
The advantages of a wrecker mainly include the following aspects:
Simple structure and low production cost: The structure of the wrecker is relatively simple, and the production process is relatively easy, so the production cost is relatively low.
Strong lifting ability: Due to the lighter curb weight of the wrecker, the rear axle load is reduced, thereby increasing the lifting ability of the entire vehicle. For the same 8-ton model, the combined type has an increased lifting capacity of 500-1500 kilograms compared to the separated type.
Easy to operate: The crane arm and support arm of the wrecker are integrated, making the operation simpler and clearer, reducing the complexity of the operation.
Good maneuverability: Due to its foldable arm and small rear overhang length, the turning radius of the vehicle is small, making it suitable for operation in narrow urban alleys and traffic roads, with good maneuverability.
Convenient maintenance of the wrecker: The design structure is concise, without the need for separate four-bar and sliding mechanisms, making it easy to use and maintain, saving lubrication and maintenance work as well as material loss.
The wrecker has high plasticity: it can be easily modified to become a clearing vehicle with automatic tire support, achieving fully automatic hydraulic operation.
Audited Supplier 
){kind=link}