| Truck parameter |
Drive mode |
4×2 |
| Total quality(kg) |
12000 |
| Truck weight(kg) |
6550 |
| Truck appearance parameter |
long(mm) |
7290 |
| Width(mm) |
2310 |
| high(mm) |
3250 |
| Wheelbase(mm) |
3800 |
| Performance parameters |
Maximum speed(km/h) |
89 |
| Maximum climbing(°) |
30% |
| Chassis configuration parameters |
engine |
Engine emissions standard |
Europe,,,, |
| Manufacturer |
Guangxi Yuchai Machinery Co., Ltd./Kunming Yunni Power Co., Ltd. |
| Exhaust(L) |
3.0-4.2L |
| Rated power(Kw) |
132-147 |
| Chassis configuration parameters |
Cab |
Model |
Double row flat top cab |
| model |
T3(1995)(1.995mWidth) |
| Standard configuration |
Bluetooth collection machine, ticing glass, electric doors and windows, central control locks, wide bumpers, roof debris boxes, multi -function steering wheels, LED daytime driving lights |
| Gearbox |
Transmission type |
Manual gear, 8 gears |
| Front bridge |
Model |
Drum brake |
| Bearing quality(kg) |
2700 |
| Rear bridge |
model |
Drum brake |
| Bearing quality(kg) |
7000 |
| Speedy |
4.875 |
| configuration parameter |
Water container |
capacity(m³) |
6 |
| Material |
High-quality Q235 carbon steel with a thickness of 3-5mm (high-tech anticorrosion internally) |
| Setting of water containers |
Hole: 1 DN500 hole with quick locking/opening device |
| Overflow port: Install one DN65 overflow port |
| Drain outlet: Install one DN40 water tank drain outlet, equipped with a ball valve |
| Water inlet: Connect one DN65 interface on each side of the water tank |
| Inlet and outlet: Install 1 water tank to water pump inlet pipe, DN125 valve, manual control, install 1 water pump to water tank filling pipe, DN65 valve, manual control |
| Equipment box |
structure |
The main frame structure is welded with high-quality square tubes, and the outer decorative panels are welded with carbon steel plates. The roof is non slip and can be walked on |
| Equipment box |
The equipment box is located at the rear of the passenger compartment, with aluminum alloy rolling shutter doors on both sides and lighting inside. Storage boxes shall be installed in the equipment compartment according to demand. The side lower skirt is equipped with a toolbox and a rolling shutter door, which can hold small tools |
| pump house |
The pump room is located at the rear of the vehicle, with aluminum alloy rolling shutter doors on both sides and the rear. There are lighting fixtures inside, and some commonly used equipment can be placed on both sides of the pump room |
| Climbing stairs and boarding handles |
The rear ladder adopts an aluminum alloy double section flip ladder, with a ground clearance of no more than 350mm during use. The upper handle is made of anti slip round steel pipe with grooves on the surface, and the surface is sprayed with plastic treatment |
| water pump |
model |
CB10/40 type atmospheric pressure vehicle fire pump |
| form |
Low pressure centrifugal type |
| Rated flow rate |
40L/s @1.0MPa |
| Rated export pressure |
1.0MPa |
| Maximum suction depth |
7m |
| priming device |
Vacuum piston pump |
| Water intake time |
Maximum suction depth time≤50s |
| pipe system |
Pipe Material |
High quality seamless steel pipe |
| Water suction pipeline |
A DN125 suction port is installed behind the pump room |
| Water injection pipeline |
There are two DN65 water injection ports on each side of the water tank, and one DN65 water pump is installed in the pump room to inject water into the tank pipeline |
| Water outlet pipeline |
One DN80 atmospheric pressure outlet with valve is installed on each side of the pump room |
| Cooling water pipeline |
Cooling water pipeline and control valve equipped with cooling power take-off |
| |
Rated flow rate |
40L/S |
| Rated pressure |
0.8MPa |
| elevation |
≥70° |
| angle of depression |
≤-45° |
| range(m) |
water:≥65m |
| Horizontal rotation angle |
≥360° |
| Other configurations |
Triangle warning sign, tool kit, spare tire located at the rear of the chassis, ABS, air conditioner. |
Audited Supplier 
){kind=link}