Technologically advanced Synchronous Gravel Sealing Truck
As the core equipment for road construction and maintenance, the advantages of Synchronous Gravel Sealing Truck mainly lie in the following aspects:
1, Efficiency and Cost Advantages of Synchronous Gravel Sealing Truck Construction
Efficient integrated operation: synchronously completing asphalt spraying and gravel spreading, reducing the process time of traditional multi equipment collaboration, and significantly improving construction speed.
Outstanding economy: Integrated design reduces equipment procurement and maintenance costs; The sealing technology itself requires less material, and the comprehensive maintenance cost is only 1/3 to 1/2 of traditional processes.
2, Synchronous Gravel Sealing Truck Technology and Quality Advantages
Material bonding firm: The interval between asphalt and crushed stone landing is short (≤ 1 second), ensuring full penetration and squeezing of both, forming a high-strength wear-resistant layer.
Precise control of spraying: Fully automatic computer control achieves stepless adjustment of spraying amount and width, with an error controlled within ± 2% and a uniformity of over 95%.
Improve road performance:
Waterproof and crack resistant: Form a dense waterproof layer to reduce diseases such as mud pumping and potholes caused by water infiltration;
Anti slip and wear-resistant: The surface structure depth increases by 30%~50%, the friction coefficient increases by 20%~30%, and the driving safety in rainy weather is significantly improved;
Extend lifespan: Repair defects such as ruts and mesh cracks, and extend the service life by 3-5 years compared to traditional techniques.
3, Synchronous Gravel Sealing Truck Operation and Security Advantages
Intelligent control: equipped with a touch screen operating system, CAN bus technology, and multi angle camera monitoring to reduce the risk of manual errors.
Environmental protection and safety design: The thermal oil circulation heating system can save more than 30% energy, and the forward construction reduces the probability of personnel coming into contact with high-temperature asphalt; Anti collision spray structure reduces equipment collision damage rate.
4, Adaptive and Flexible Synchronous Gravel Sealing Truck
Widely applicable scenarios: It can be used for both preventive maintenance of highways (spray rate of 1.5-2.5 kg/m ²) and as a surface layer for low-grade highways (spray rate of 2.5-4.0 kg/m ²).
Precise targeted repair: supports targeted repair of local diseases, reducing material waste by 15% to 20%.
Through mechanization, intelligence, and technological innovation, this equipment has achieved comprehensive breakthroughs in construction efficiency, quality, and economy, becoming a technological benchmark for modern road maintenance.
| Technologically advanced Synchronous Gravel Sealing Truck |
| |
Item |
Specification |
| |
Vehicle model |
STQ5250 |
| Overall |
GVW (kg) |
Appro×25000 |
| |
Mass in working order (kg) |
Appro×17000 |
| |
Overall dimensions (mm) |
10650x2500x3550 |
| |
Fact loading capacity (L) |
4000+10000 |
| |
Max. Speed (km/h) |
90 |
| |
Wheel base (mm) |
4600+1350 |
| |
Front/Rear track base (mm) |
2022/1830/1830 |
| |
Front/Rear overhang (mm) |
1500/2545 |
| |
Number of axles |
3 |
| |
F/R Axle |
7000/13000 |
| |
Traction system |
6x4 |
| |
Operation control system |
Power steering |
| |
Braking system |
Full air |
| |
Electric system |
24V |
| Chassis |
Transmission |
10 speeds + 2 rear |
| |
Tire specification |
12.00-20 |
| |
Tire quantity |
10+1 |
| |
Engine model |
WD615.87 |
| |
Emission standard |
Euro 2 |
| Engine |
Exhaust/output |
9726/213 |
| |
Horse power |
290 |
| |
Asphalt tank capacity |
3000 Liters |
| |
Water tank capacity |
3500 Liters |
| |
Gravel capacity |
12000 Liters |
| |
Support tank capacity |
400 Liters |
| |
Proportional valve |
Taiwan EFBG-03-160-HF |
| |
Asphalt pump |
QGB680 |
| |
Hydraulic motor for asphalt pump |
05-110-BD31 |
| |
Heating System |
Italian burner Riello (G20) |
| |
Heat-transfer oil pump |
40-25-160 |
| |
Control System |
SIEMENS CLW-32-01 |
| |
Generator |
5.5KW gasoline engine generator |
| |
Number of nozzle |
32 |
| |
Spray medium |
Hot asphalt/ Hot modified asphalt/ Cutback asphalt/ Emulsified asphalt |
| |
Spray width(m) |
4 |
| |
Spray amount(L/m2) |
0.3-3.5 |
| Upload Part |
|
1.Altitude: 0-4500m |
| |
|
2.Temperature: -350C~+450C |
| |
|
3.Relative humidity: 80% |
| |
Working Condition |
4.Wind force: ≤8 degree |
Audited Supplier 
){kind=link}