| Customization: | Available |
|---|---|
| After-sales Service: | Negotiate |
| Warranty: | Lifetime Warranty |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Description | |||
| Manufacturer | Hubei Tri-Ring Motor Co.,Ltd. | ||
| Vehicle model | STQ5040 | ||
| Basic vehicle parameters | Driving form | 4×2 | |
| GVW(kg) | 11750 | ||
| Kerb weight(kg) | 7300/7700 | ||
| Vehicle overall parameters | Length (mm) | 7575/7855 | |
| Width (mm) | 2380 | ||
| Height (mm) | 2900 | ||
| Wheelbases (mm) | 3800 | ||
| Performance Parameters | Top speed (km/h) | 80 | |
| Maximum Climbing Gradient | 30% | ||
| Chassis configuration parameters | Engine | Emission Standards | Euro II, III,IV,V,VI |
| Manufacturer | YUCHAI/YUNNEI | ||
| Displacement (L) | 2.5L-4L | ||
| Rated power(Kw) | 110-147 | ||
| Chassis configuration parameters | Cabs | Type | Single-row flat roof |
| Model | T3(1995) | ||
| Standard configuration | Bluetooth radio, laminated glass, electric doors and windows, central locking, wide bumpers, roof box, multi-function steering wheel | ||
| Transmission | Transmission type | Manual, 8-speed | |
| Front axle | Type | Drum brake | |
| Loading Capacity (kg) | 2500 | ||
| Rear axle | Type | Drum brake | |
| Loading Capacity (kg) | 7200 | ||
| Speed ratio | 4.875 | ||
| Chassis configuration parameters | Chassis | Size | 250×65×230(6.5+5) |
| Springs | Number of tablets | 8 front springs, 10+7 rear springs | |
| Tyres | Type | Steel tyre | |
| Quantities | 6+1 | ||
| Model number | 8.25R20 16PR | ||
| Steering system | Type | Hydraulic power steering | |
| Braking system | Brake type | Drum brakes with ABS | |
| Type of driving brake system | Dual circuit air brake | ||
| Type of parking brake system | Spring brake | ||
| Parking manoeuvre type | Hand brake operation | ||
| Electrical system | System voltage | 24V | |
| Accumulators | 100AH | ||
| Upfitting Parameters | Dustbin volume (CBM) 12 Thickness of bin material (mm) Side 4, bottom 5 Filler volume (CBM) 1.9 Compression density(T/CBM) 0.6-0.8 Compression cycle time (s) ≤30 Pushing and unloading time (s) ≤60 Hydraulic oil pump, multi-way valve, oil cylinder, full hydraulic operation with back pressure valve, two-way balancing valve, PLC electronic control system, 2 operation boxes, 1 light, 1 sewage tank on the side of the beam, 1 sewage tank at the bottom of the filler, 240-litre bin tipping mechanism at the tail end |
||
| Other Configurations | Warning triangle, tool kit, spare wheel on the side of the frame, ABS, air conditioning. | ||
){kind=link}