Item |
Unit |
Parameter |
Vehicle Parameters |
Vehicle mass |
kg |
12400 |
Maximum Gross Mass |
kg |
18000 |
Rated load mass |
kg |
5405 |
Overall dimensions (L×W×H) |
mm |
8920×2490×3040 |
Minimum Ground Clearance |
mm |
200 |
Operation Performance |
Approach/Departure Angle |
° |
17/14 |
Maximum sweeping width (including curb wash width) |
m |
4.1 |
Sweeping width of road surface (without curb washing width) |
m |
3.5 |
Maximum wash water pressure |
MPa |
9.5 |
Maximum wash water flow rate |
L/min |
142 |
Low-pressure washing width |
m |
24 |
Sweeping width |
m |
3.5 |
Sweeping speed |
km/h |
3~20 |
Maximum cleaning capacity |
/h |
70000 |
Discharge angle |
° |
≥48 |
Driving performance |
Maximum speed (full load) |
km/h |
89 |
Maximum Climbing Angle |
% |
30 |
Braking distance (full load 30km/h) |
m |
≤10 |
Minimum turning diameter |
m |
20 |
Full sweeping operation on level road surface, operating speed 7km/h |
Standard Operating Model (SOM) |
L/h |
15.5 |
L/10000 |
6.32 |
Full sweeping operation on leveled road surface, operating speed 7km/h |
Standard Operating Model (SOM) |
L/h |
12.5 |
L/10000 |
5.1 |
Chassis parameters |
Chassis model, type, manufacturer |
5180 |
Number of people loaded |
3 |
Engine model, manufacturer |
Guangxi Yuchai Machinery Co., Ltd. |
Rated engine power |
169kw/2300r/min |
Maximum net engine power |
166kw |
Transmission model |
DT0690 |
Transmission type |
6.75/4.08/2.48/1.55/1.00/0.74/6.06R |
Tire |
front wheel |
275/80R22.5 18PR |
rear wheel |
275/80R22.5 18PR |
Sweep Truck that meets international safety standards
Sweep Truck has the following advantages:
Multifunctionality: The Sweep Truck can not only perform ground cleaning, but also perform tasks such as roadside cleaning, roadside cleaning, and ground watering. This versatility makes it suitable for cleaning operations in various climates and different road surfaces, especially for cleaning and dust removal in places such as squares, highways, residential areas, parking lots, docks, airports, stations, cement plants, power plants, etc.
Efficient cleaning: The sweeping and vacuuming system of the Sweep Truck is equivalent to 6-40 times the manual labor, which can significantly improve work efficiency and reduce labor costs. Its cleaning cost is lower than manual labor, and the cleaning effect is better, avoiding the problems of uneven use of cleaning agents and inconsistent cleaning effects.
Environmental performance: The Sweep Truck does not generate secondary dust during the cleaning process. The system undergoes multi-stage filtration to ensure that the clean airflow is discharged into the atmosphere without any dust entering the fan, greatly increasing the service life of the fan. In addition, its adjustable mist spray water pressure dust function eliminates secondary pollution while saving water.
Strong adaptability: Sweet Truck has good adaptability to damp dust, small amounts of accumulated water, and corrosive dust, and will not corrode the fan. Its main suction port is supported by three points, with good ground adhesion, stable negative pressure, and good suction effect. The suction port is located at the rear of the chassis, and the right angled corner can be cleaned by reversing, reducing blind spots during cleaning.
Easy maintenance: The structure of the Sweet Truck is relatively simple, with a low failure rate and easy maintenance. The hydraulic system adopts advanced intermittent jog operation mode, with each action taking no more than 30 seconds. The hydraulic oil pump adopts electromagnetic automatic clutch, which has a short working time and no heating of the hydraulic system, greatly improving the stability and reliability of performance and a long service life.







