Dry powder foam combined fire truck committed to becoming an application leader
The advantages of dry powder foam water triple use fire truck are mainly reflected in its versatility, efficient fire extinguishing ability and ability to adapt to a variety of fire scenarios.
Firstly, multifunctionality is one of the biggest advantages of dry powder foam water triple use fire truck. This fire truck integrates three fire extinguishing systems, namely dry powder, foam and water, and can be flexibly switched according to different fire situations. The dry powder system is suitable for extinguishing fires involving flammable and combustible liquids, gases, and live equipment; The foam system is good at dealing with oil fires and controlling the fire by covering the fire source to isolate oxygen; The water system can be used for extinguishing fires involving general solid materials. This multifunctionality enables a vehicle to respond to multiple fire scenarios, improving the flexibility and efficiency of emergency response.
Secondly, the efficient fire extinguishing capability is also one of the significant advantages of Dry Powder Foam Water Triple Use Fire Truck. The dry powder foam water triple use fire truck can judge the fire situation at the first time and quickly switch to the most appropriate fire extinguishing mode. The dry powder system can penetrate deep into the fire source, quickly reduce temperature and isolate air, achieving rapid fire extinguishing; The foam system can effectively control the fire spread by covering the fire source to isolate oxygen; The water system provides continuous water source support to ensure the continuity and stability of the fire extinguishing process. This efficient firefighting capability enables vehicles to quickly control the situation and reduce losses when dealing with large-scale or complex fires.
In addition, adapting to various fire scenarios is also an important advantage of dry powder foam water triple use fire truck. The dry powder system is suitable for extinguishing fires involving flammable and combustible liquids, gases, and live equipment; Foam system is good at dealing with oil fire and general solid material fire; The water system can be used for extinguishing fires involving general solid materials. This comprehensive adaptability enables vehicles to play an important role in various complex fire scenarios, meeting the firefighting needs of different occasions.
Finally, technical parameters and safety performance are also worth paying attention to. The dry powder foam water triple use fire truck usually uses high-performance diesel engine to ensure sufficient power; Strong liquid carrying capacity, capable of carrying a large amount of fire extinguishing agents; Excellent spraying performance, high working pressure of dry powder tank, and high spraying intensity; Complete security configuration ensures stability and safety during emergency rescue. The improvement of these technical parameters and safety performance further enhances the application effect and reliability of vehicles in actual combat.
| Name of the manufacturer |
Hubei Tri-Ring Motor Co.,Ltd. |
| Basic parameters of vehicle |
Drive form |
6×4 |
| Total mass (kg) |
25000 |
| Curb weight (kg) |
16550 |
| Overall appearance parameters of the vehicle |
Length (mm) |
7290 |
| Width (mm) |
2310 |
| Height (mm) |
3250 |
| Wheelbase (mm) |
3800 |
| Performance parameters |
Maximum speed (km/H) |
89 |
| Maximum gradeability (°) |
30% |
| Chassis configuration parameters |
Engine |
Engine emission standards |
|
| Manufacturer |
Yuchai/Yunnei |
| Displacement (L) |
3.0-4.2L |
| Rated power (Kw) |
132-147 |
| Chassis configuration parameters |
Cab |
Type |
Double-row flat-top cab |
| Model |
T3 (1995) (1.995m wide) |
| Standard configuration |
Bluetooth radio, laminated glass, electric doors and windows, central locking, wide bumper, roof glove box, multi-function steering wheel, LED daytime running lights |
| Gearbox |
Gearbox type |
Manual, 8th gear |
| Front axle |
Type |
Drum brake |
| Loadable mass (kg) |
2700 |
| Rear axle |
Type |
Drum brake |
| Loadable mass (kg) |
7000 |
| Speed ratio |
4.875 |
| Chassis configuration parameters |
Frame |
Section size (mm) |
230×65×(6.5+5) |
| Leaf spring |
Number of pieces |
8 front springs, 11 + 8 rear springs |
| Tire |
Type |
Steel Wire Tyre |
| Quantity |
6+1 |
| Model |
11.005R20-16 |
| Steering system |
Type |
Hydraulic power steering system |
| Braking system |
Brake type |
Drum brake with ABS anti-lock brake system |
| Type of service brake system |
Double circuit air brake |
| Type of parking brake system |
Spring Brake |
| Parking control type |
Hand brake control |
| Electrical system |
System voltage |
24V |
| Battery |
100AH double battery |
| Upload configuration parameters |
Pitcher |
Capacity (m ³) |
6 |
| Material |
High-quality Q235 carbon steel, with a thickness of 3-5mm (high-tech anti-corrosion inside) |
| Can-body setting |
Manhole: 1 DN500 manhole with quick locking/opening device |
| Overflow port: 1 DN65 overflow port |
| Drain outlet: 1 DN40 water tank drain outlet with ball valve |
| Water injection port: connect one DN65 connector on the left and right sides of the water tank respectively. |
| Water inlet and outlet: 1 water tank to water pump inlet pipe, DN125 valve, manual control, 1 water pump to water tank filling pipe, DN65 valve, manual control |
| Equipment box |
Structure |
The main frame structure is welded with high-quality square tubes, the outer decorative plate is welded with carbon steel plates, and the roof is skid-proof and walkable. |
| Equipment box |
The equipment box is located at the rear of the passenger compartment, with aluminum alloy shutter doors on both sides and lights inside. Storage boxes shall be set in the equipment box room as required. The side lower skirt is provided with a tool box and a rolling door, which can be used for placing small tools. |
| Pump house |
The pump room is located at the rear of the vehicle, with aluminum alloy rolling doors on both sides and at the rear. There are lights inside. Some common equipment can be placed on both sides of the pump room. |
| Ladder and boarding handle |
The rear ladder is a two-section aluminum alloy turning ladder, which is not more than 350 mm above the ground when in use. The upper handle is a non-slip round steel pipe with a groove on the surface, and the surface is treated with plastic spraying. |
| Water pump |
Model |
CB10/40 type normal pressure vehicle fire pump |
| Form |
Low pressure centrifugal |
| Rated flow |
40L/s @1.0MPa |
| The export volume is under pressure |
1.0MPa |
| Maximum suction depth |
7m |
| Diversion device |
Vacuum piston pump |
| Diversion time |
Maximum suction depth ≤ 50 s |
| Piping system |
Pipe material |
High quality seamless steel pipe |
| Suction line |
A DN125 suction port is set at the rear side of the pump house. |
| Water injection line |
The left and right sides of the water tank are respectively provided with a DN65 water injection port, and the pump room is provided with a DN65 water pump to inject water into the tank. |
| Water outlet pipeline |
The left and right sides of the pump house are respectively provided with one DN80 atmospheric water outlet with valve. |
| Cooling water piping |
Equipped with cooling water pipeline and control valve for cooling power takeoff |
| Vehicle-mounted fire water monitor |
Model |
PS 8/40W Fire ProtectionGun |
| Manufacturer |
Chengdu West Fire Fighting Machinery Co., Ltd. |
| Rated flow |
40L/S |
| Rated pressure |
0.8MPa |
| Elevation |
≥70° |
| Angle of depression |
≤-45° |
| Range (m |
Water:≥65m |
| Horizontal rotation angle |
≥360° |
| Other configurations |
Warning triangle, tool kit, spare tire at rear of frame, ABS, air conditioning. |
Dry powder foam water triple use fire truck starting from customer needs
Audited Supplier 
){kind=link}