| Item |
unit |
parameter |
| Vehicle model |
|
STQ5250 |
| Chassis model |
|
STQ1250 |
| Overall dimensions |
mm |
9720×2500×3585 |
| |
Fact water cubage |
L |
12000 |
| |
GVW |
kg |
Appro×26550 |
| |
Kurb Weight |
kg |
14300 |
| |
Wheel base |
mm |
4325+1350 |
| |
F/R track base |
|
2022/1830/1830 |
| |
Approach/departure angle |
° |
16/13 |
| Exhaust/kw |
ml/kw |
9726/247 |
| Max speed |
km/h |
95 |
| Tire specification |
11.00R20 16PR |
Engine type |
WD615.95E |
| Traction system |
6*4 |
transmission |
10-speed with over drive |
| Number of axles |
3 |
Electric system |
24v |
| Operation control system |
Electrically hydraulic control |
Allowable passengers in cab |
6 |
| Maximum Torque |
666/1700(NM/rpm) |
Fuel Consumption |
22.4L/100KM |
| Fire Equipment |
Fire cannon |
Model:PP48, |
| range water ≥60m /1.0MPa,foam≥55m |
| flow 40L/S |
| Angle: horizontal 360°,pitchangle -30°~80° |
| Fire pump(middle/low pressure) |
CB20.10/30.60 , |
| flow :middle pressure 30L/s/2.0MPa |
| low pressure 60L/s /1.0Mpa |
| Fire pump(normal pressure) |
BS60 |
| Flow:60L/s/1.0Mpa |
| Tank thickness |
Bottom, front closure panels, rear closure plate 4mm, side panels, anti-swing panels, roof (non-slip tread plate) |
| 3mm |
| Electricity |
Top front of the cab for the long row of lights, body is equipped with 24V, 60W lighting a fire, vehicles on both sides with red and blue to match the burst of flashing lights, security lights installed beneath the crew compartment, equipment boxes, pumping stations are equipped with lights, install a 100W siren, revolving lights, switches, communications equipment ready interface. |
The dry powder foam combined fire truck has the following advantages:
Dual fire extinguishing system: the dry powder foam combined fire truck integrates the dual advantages of the dry powder fire extinguishing system and the foam fire extinguishing system, which can quickly cover the fire source, isolate oxygen, and effectively extinguish the initial fire and reignition fire through physical and chemical dual effects. Especially suitable for special fire scenarios such as oil and electrical fires.
Dry powder foam combined fire truck: the combined use of dry powder and foam significantly improves the fire extinguishing speed and efficiency, and reduces the risk of fire spread. The intelligent foam proportion mixing technology automatically adjusts the proportion of foam and water according to the fire situation, forming a fine and even foam layer, covering the surface of the fire source, insulating and cooling, suffocating and extinguishing, while reducing water loss, protecting the safety of surrounding facilities and personnel.
Strong environmental adaptability: The dry powder foam cobined fire truck design considers different terrain and climate conditions, whether it is narrow streets in cities or complex terrain in mountainous areas, it can flexibly shuttle and quickly reach the fire scene, winning valuable time for quickly controlling the fire.
Intelligent control: Dry powder foam cobined fire truck integrates IoT technology to achieve fire monitoring, data analysis, and remote scheduling, improving overall efficiency. Equipped with advanced remote control system, it allows operators to operate fire trucks from a safe distance, improving emergency response speed and operational safety, especially demonstrating its unparalleled advantages in hazardous environments.
Environmental protection and energy conservation: Dry powder foam cobined fire truck uses low environmental impact materials to reduce water consumption and secondary pollution to the environment during the fire extinguishing process. Modular design is easy to maintain and upgrade, and can quickly replace or add/remove equipment modules according to actual needs, extending their service life.
Audited Supplier 
){kind=link}